Vai al contenuto

info Riparazione Centralina Blue&Me gruppo Fiat


off

Messaggi raccomandati

Il 11/12/2020 at 01:36 , Corra.bin ha scritto:

 

qualcuno ha la foto di un semplicissimo schema di collegamenti per leggere il microprocessore di sta benedetta scheda 

 

Leggi bene i post precedenti e trovi lo schema per leggerlo.

Link al commento
Condividi su altri siti

20 ore fa, Corra.bin ha scritto:

Siamo propio in Italia.cos è mafia se hai il consenso del capo metti il contatto seno no 

Semplice REGOLAMENTO.

Oltre a quanto detto da @PaoloT , vorrei aggiungere che il sito è gestito da chi stabilisce regole legate alla funzionalità della piattaforma stessa e i vincoli sono doverosi a fronte di chi offre un servizio (a pagamento o meno che sia).

O le rispetti o non entri. È inutile generare flame unicamente per aver ignorato il regolamento.

il discorso mafia potevi evitarlo, avrebbe avuto più senso paragonarlo al capitalismo ma non usciamo troppo dal binario... Scusate l'OT

Link al commento
Condividi su altri siti

Il 18/12/2020 at 16:07 , alfa8x ha scritto:

Ciao Nek, potresti mandarmi un pm con la tua mail? grazie 

 

Il 17/10/2020 at 10:45 , alfa8x ha scritto:

ciao cosimo si può leggere se vuoi scaricati il mio allegato che ho postato

 

Il 17/10/2020 at 10:35 , alfa8x ha scritto:

ditemi se non è chiaro qualche passaggio...

ciao scusa no ho capito dove prendere il tuo postato grazie. Se vuoi la mia mail e' [email protected] grazie

Link al commento
Condividi su altri siti


Hello I have also problem with Blue and Me ecu... Doesnt respond...Odometer not blinking but usb/aux and wheel command doesnt work.... I have programattor Tll866 I just buy socket for flash nand chip and I have rebooling machine so I can remove and reflash the chip.... I only need some good guy who can give me good firmware for this ecu (51989250) This is ecu with Navi....

Im also willing to pay if need but no more of 50$... I only need firmware nothing else... 

Or if somebody have the firmware and ask more of that... and somebody also need the same firmware we can collect money and pay fir that firmware.... Some people give me offer of 100$ to give me firmware but its not legit and I dont know him personal so Im affraid that I will be scammed maybe....

What you think guys ?

Link al commento
Condividi su altri siti

  • 1 mese dopo...

ciao

personale esperienza con il modulo con un guasto da ossidazione (infiltrazione liquidi) blue&me su fiat qubo:

Pulizia/disossidazione della scheda e dissaldatura , reballing e risaldatura memoria emmc MICRON MT29F1G08ABBDAH4.

Se qualcuno riesce a recuperare il dump originale di questa memoria e' possibile scriverla con il programmatore RT809H .Sarebbe necessaria un'esperienza di saldatura di questi ic.

rt809h.png

  • Like 1
Link al commento
Condividi su altri siti

Ciao Orlando 

1: non e nua emmc  ma si chiama "NAND" :)

2: RT non lavora bene. sui nand civuole programmatore buono che ne compri 20 RT come prezzo.

3: purtroppo le blue&me cia il cablaggio multistrato quindi capisci che a volte e impossible trovare il guasto...

  • Like 2
Link al commento
Condividi su altri siti

ciao , hai ragione è una nand ..ne ho riparate 3 finora e tutte avevano lo stesso problema a parte quella che ho disossidato .

uso rt809h perche' mi fa anche gli ITE (ec) per laptop e alcune memorie installate negli strumenti musicali elettronici oltre che alle eeprom serie ST / Atmel per auto. Quindi per non avere la collezzione di programmers mi affido a un'unico tool , assolutamente daccordo che ce ne siano di meglio.

A mio parere i guasti in percentuale che succedono sono dovuti alle continue vibrazione della vettura e di conseguenza il distacco o frattura dei pin solder sotto la nand che potrebbe essere un punto debole di progettazione.

La prova che sia questo l'ho fatto prima eseguento un rehot (riscaldamento con aria calda a 340 gradi ) e poi successivamente  ho chiuso il lavoro con un reballing.

I layers ( strati) comunque sono 2.

Modificato da orlando
Link al commento
Condividi su altri siti

Hello,Today I remove the memory chip and try to read with TLL866 II Plus.... I made read but when comes to verify nand flash all blocks are error...also I try everything to program that file on new nand chip but tll 866 II tells me programing failed cannot program...

What can be the problem... damage memory chip or file inside chip? The file who I read is around 136mb I think and has a lot of information inside but I think that is corrupted

I tried everything... first only reflow on memory chip and cpu ant test nothing...then I remove the chip and read it on programmator but as I said above again nothing

I have blue and me unit 51989250 

2021-02-05 13.27.39.jpg

2021-02-05 13.28.17.jpg

2021-02-05 13.54.57.jpg

2021-02-05 13.54.58.jpg

Link al commento
Condividi su altri siti

ragazzi, vi scrivo qua perchè più o meno conoscete tutti il blu & me, ho aperto questo argomento , dovrei disattivare la centralina per poi fare allineamento proxy ma non va, cosa dovrei cambiare?

 

Modificato da Denny78
Link al commento
Condividi su altri siti

  • 4 settimane dopo...
  • 1 mese dopo...

Hello my new friends
I join this forum for this thread

I by a new B&M nav module for ford and another for peugeot no nav version (3 versions are made)

We made curve trace of entire board
then we test 10 bad boards
not all boards have same faults

I attach picture of one

I understand main problem is corrupt nand - this was on DK forum a few years ago
There is a SPi connection but I not found this

Rt809H with bga63 adapter can read and write we believe

maybe possible to make spi connection

blue me curve.jpg

  • Like 1
  • Thanks 1
Link al commento
Condividi su altri siti

1 ora fa, JustJames ha scritto:

Hello my new friends
I join this forum for this thread

I by a new B&M nav module for ford and another for peugeot no nav version (3 versions are made)

We made curve trace of entire board
then we test 10 bad boards
not all boards have same faults

I attach picture of one

I understand main problem is corrupt nand - this was on DK forum a few years ago
There is a SPi connection but I not found this

Rt809H with bga63 adapter can read and write we believe

maybe possible to make spi connection

blue me curve.jpg

Wow1 ottimo lavoro.... questo lavoro lo fate per ogni ecu?

Link al commento
Condividi su altri siti

we do this digital mapping for many ecu that have issue

we buy a new one and dismantle record it

then we can test broken part against it

But only if the math works to make a business
Once you have the test plan then testing an ecu takes up to 1hr but once we have tested 3 or 4 we know where to look straight away and do not need to do test

You have to do this to learn it takes 2 weeks to add a new product

Link al commento
Condividi su altri siti

  • 2 mesi dopo...
  • 3 mesi dopo...
  • 2 mesi dopo...

Io l’ho comprato,pagato 3,070 euro iva compreso…

i ladri su un importo così alto pure i 20 euro di spedizione si sono presi … non era nemmeno un pacco assicurato considerato l’importo! 
ma la sorpresa non finisce qua…

lo strumento non funziona,il software non si avvia… chiamo l’assistenza e mi sento dire che è un problema di sistema operativo, prima mi hanno detto di installare win 10… cosa che comunque non ha risolto il problema

e poi lo stesso con Windows 11!!

che dire ragazzi,un vero pacco.

Link al commento
Condividi su altri siti

Il 16/5/2021 at 12:39 , JustJames ha scritto:

we do this digital mapping for many ecu that have issue

we buy a new one and dismantle record it

then we can test broken part against it

But only if the math works to make a business
Once you have the test plan then testing an ecu takes up to 1hr but once we have tested 3 or 4 we know where to look straight away and do not need to do test

You have to do this to learn it takes 2 weeks to add a new product

hello, may I ask you with which tool you do this type of "diagnosis" on the control units?

Link al commento
Condividi su altri siti

  • 10 mesi dopo...
  • 1 mese dopo...
  • 7 mesi dopo...

I'm sorry to post here in english, but I think it will be much better that to translate in with use of Google or any other solution.

I'm looking for way to repair this unit, but the question is, if there is really broken NAND, how to find software dump without buying expensive toolset (~3000+ euro)?

If I buy working unit and somehow copy software from NAND and put to mine - it will work or not?

Link al commento
Condividi su altri siti

Crea un account o accedi per lasciare un commento

Devi essere un membro per lasciare un commento

Crea un account

Iscriviti per un nuovo account nella nostra community. È facile!

Registra un nuovo account

Accedi

Sei già registrato? Accedi qui.

Accedi Ora


×
×
  • Crea Nuovo...