Vai al contenuto

errore sul quadro strumenti 00003 audi tt


girgenti francesco

Messaggi raccomandati

Ho spostato la discussione nell'area corretta e qui sotto ti copio quanto trovato per la risoluzione:

00003 - Control Module: No or Incorrect Basic Setting / Adaptation
Possible Causes

Basic Setting(s) not performed

Possible Solutions

Perform Basic Setting(s)

Special Notes

When found in Control Head / Multi Media Interface (MMI), check Adaptation Channel 012 (Telephone Type) for Plausibility.
Details for Audi A6 (4F): Multi Media Interface (MMI)
Details for Audi A8 (4E): Multi Media Interface (MMI)
Details for Audi Q7 (4L): Multi Media Interface (MMI)
When found in Audi A3/S3 (8P): Instrument Cluster:
Check/Perform Instrument Cluster Service Interval Settings (Adaptation Channels 42, 43, 44, 45 and 49)
When found in Brake Electronics (MK60EC1):
Replacing the Brake Electronics Control Module (J104) but keeping the (old) Hydraulics Unit will result in the Intake and Disconnecting Valves not being synchronized. A Basic Setting for the Intake/Disconnecting Valves will solve this problem.
When found in the Audi A4 (8H) Automatic Roof perform the Adaptation and see the Special Notes.

  • Like 1
Link al commento
Condividi su altri siti

31 minuti fa, Tky ha scritto:

Ho spostato la discussione nell'area corretta e qui sotto ti copio quanto trovato per la risoluzione:

00003 - Control Module: No or Incorrect Basic Setting / Adaptation
Possible Causes

Basic Setting(s) not performed

Possible Solutions

Perform Basic Setting(s)

Special Notes

When found in Control Head / Multi Media Interface (MMI), check Adaptation Channel 012 (Telephone Type) for Plausibility.
Details for Audi A6 (4F): Multi Media Interface (MMI)
Details for Audi A8 (4E): Multi Media Interface (MMI)
Details for Audi Q7 (4L): Multi Media Interface (MMI)
When found in Audi A3/S3 (8P): Instrument Cluster:
Check/Perform Instrument Cluster Service Interval Settings (Adaptation Channels 42, 43, 44, 45 and 49)
When found in Brake Electronics (MK60EC1):
Replacing the Brake Electronics Control Module (J104) but keeping the (old) Hydraulics Unit will result in the Intake and Disconnecting Valves not being synchronized. A Basic Setting for the Intake/Disconnecting Valves will solve this problem.
When found in the Audi A4 (8H) Automatic Roof perform the Adaptation and see the Special Notes.

grazie mille

Link al commento
Condividi su altri siti

Crea un account o accedi per lasciare un commento

Devi essere un membro per lasciare un commento

Crea un account

Iscriviti per un nuovo account nella nostra community. È facile!

Registra un nuovo account

Accedi

Sei già registrato? Accedi qui.

Accedi Ora

×
×
  • Crea Nuovo...