Vai al contenuto

mandax

Gratuito
 Visualizza profilo  Vedi la sua attività

  • Numero contenuti

    24

  • Iscritto

  • Ultima visita

 Tipo di contenuto 

Tutti i contenuti di mandax

  1. mandax
    Hello Can you help me with some maps in edc16c39 on Alfa Giulietta ? I don't know what is this map on my car Thanks in advance,i want to try another setup for more power This is the orig file for details giulietta 510823_org_full dump.rar
  2. mandax
    Derbisenda ,is work fine ,i put the limit higher because at 2250 is too low .At 3200 is ok.Thanks my friend Now,i want to try another tuning setup with dpf and egr on for more power . If anyone have a tested file i cand pay for her. Thanks in advance
  3. mandax
    Case closed ,if you need i read in boot mode with MPC Swap because the ecu was "melted" Thanks all
  4. mandax
    nobody?
  5. mandax
    Hello I need bdm file for Fiat Bravo 1.4 tjet 120 hp ecu bosh 0261201688 read in boot mode ,i have read in obd but the ecu is another version and i try to swap sw Thanks in advance
  6. mandax
    Derbisenda Thanks TKY ,i tested your file and is not good .The launch is at 5500 Derbisenda,thanks for your help ,i tested you file ,not work Nice people on this forum ,very nice
  7. mandax
    Thanks TKY ,i tested your file and is not good .The launch is at 5500 Derbisenda,thanks for your help ,i tested tomorow that file Nice people on this forum ,very nice
  8. mandax
    Tested on car right now ,this adress is RPM Limit is not limit for launch
  9. mandax
    Ok,i try with this limiter.Thanks my friend
  10. mandax
    Hello On this car with manual transmision where is the limit for launch control ? Thanks in advance giulietta _org_full dump
  11. mandax
    ok "Grazie tanto"
  12. mandax
    Ok ,thanks my friend i pay for this because you know "time is money" If you need ,keep it on this site giulietta 510823_org_.FLS
  13. mandax
    I have the good solution(edc16c39) but this nice car is killed with Ecusafe
  14. mandax
    Ciao I need this file for Alfa Giulietta from 2010 because is made DPF off with Ecusafe Grazzie
  15. mandax
    Hello Can you upload again this file because i have an Alfa Giulietta with wrong modified file 1037516790_0281015984_DPF+EGR.zip Thanks in advance
  16. mandax
    work read/write perfect with galletto v54 in boot mode
  17. mandax

    Bravo 2008 Bosh ME 7.9.10

    mandax ha pubblicato una discussione in Immobilizer

    Hello . At Bravo 2008 with ecu Bosh ME 7.9.10 anyone know how i can virginize or immo off this car? Not work Im 3.2 ,.etc Thanks
  18. mandax
    The technical support suggested searching the software “Microsoft visual C++2005/2008/2010” on Google and then install it on computer. Download Visual C++ 2005 library from Google and installin your PC.
  19. mandax
    Just copy the 29f400 with a programator and write in another ecu ,If you want desolder 29f400 and solder in another ecu .Is work in boot mode with galletto v54 but is complicated.If toy want i can help you with virgin or immo file fort this ecu
  20. mandax
    For 832 kb file use kess v2 or magpro2 .galletto not write this file
  21. mandax
    Hello .I'm Georgy, a italian car fan car and i can help with a lot of file and licensed programs for dpf,egr,dtc,flaps on,etc Nice to meet you my friends
×
×
  • Crea Nuovo...